Curvemeister Forum

Got CM email of Fri Aug 9 with some links.

Link to new class 101 gets a dead end error....I looked on site for new class info but none seen (only old info)???  (Other vid links work)

Checked for new downloads update and it lists 3.8.2 for 32bit but not 64bit....correct? or just wait a little longer? Is there a separate place to download the files or will update do all locations: CS5, CS6, CC?

Doug

Hi Doug...
I found the same dead link in the e-mail...

The Class dates are August 25th.  The fourm thread for the enrollment and class should be correct but I will double check them.

The Download for 32 and 64 bit work but hte byte counter on the web page shows 0 bytes.  It is a web display issue that Mike is looking at.
If you click on the 64 bit link it works...It did for me.

Greg

I got the updater to DL + install 32bit CM 3.8.2 and it works OK (installed auto OK) in x32 CS5, CS6, and CC trial.

But updater also says x64 is current/no update available as 3.8.1. So all x64 Ps's are still at CM 3.8.1

So I'll wait a couple days till you all have time to fix it, not a problem....just letting you know.

And please let me know if there is a link to download rather than using the auto updater?  I looked all over the forum and CM.com home and pages but could not find downloads except the demo versions.  I know I found them before somewhere.

Doug

If you manually download from the forum links you will get the 64 bit installer.

It shows a 0 byte count but it is there.  Go to the link shown below

http://www.curvemeister.com/forum/index.php?action=downloads;cat=3

Greg

Thanks, got the file OK, will install soon.
And I saved the link for next time.

Just as fyi in case it helps to fix the updater problem, see attached screen capture for ref. (This is after I did update from auto updater but before manually downloading and installing Curvemeister3-64-3.8.2.exe)

Doug

update: Curvemeister3-64-3.8.2 manually installed running the .exe file and works fine in CS5, CS6, CCtrial  and now the auto updater shown below displays correctly: both rev to 3.8.2

Update 10-20-14: works OK in CC2014

Glad it worked for you.

I'll flag this thread for Mike.

Greg

  I looked all over the forum and CM.com home and pages but could not find downloads except the demo versions.  I know I found them before somewhere......!!!

click on link a few posts above in this same thread...takes you to the downloads

The links to the downloads are in the breadcrumb trail at the top of the web pages.